|
Latest Issue
 |
Login
- Category: Articles
Making Offshore Access as Easy as Crossing the Street
Accessing offshore wind turbines is critical to keep all systems running. This is especially true when the weather deteriorates, wind speeds pick up and production can be maximised. But offshore these conditions also mean that wave heights increase and access by boat can become impossible. The Ampelmann has been developed to increase the accessibility from a ship, even in high wave conditions. The system uses six hydraulic cylinders (also used in flight simulators) to support a transfer deck and gangway. By measuring the ship motions continuously and controlling the length of the cylinders, the transfer deck stands completely still compared to the wind turbine. Access to the turbine then becomes 'as easy as crossing the street'.By Jan van der Tempel and David Cerda Salzmann, Delft University of Technology Offshore Engineering, the Netherlands
- Category: Articles
Using UAVs for Wind Resource Estimation
Aerial photography can be of great value in the planning process for wind farms, including tasks such as wind resource estimation, verification of area maps and finding routes for transportation. However, this can be a rather expensive tool. A system has been developed to use a small unmanned air vehicle (UAV) to perform such photography tasks by using automated optimised routing and piloting. The goal was to allow inexperienced model airplane pilots to perform aerial photography with the required precision. This article explains the concepts, and the UAV hardware and system software developed within the project, which was conducted at Overspeed GmbH & Co. KG.
By Felix Dierich and Dr Hans-Peter (Igor) Waldl, Overspeed, Germany
.- Category: Articles
A Powerful Tool for Analysing Wind Turbine Rotor Designs
Computational fluid dynamics (CFD) gives a unique insight into the complex flow phenomena that govern the aerodynamics of wind turbines. Through a dedicated research and development effort CFD is steadily reaching a level of maturity where it is becoming indispensable in the analysis of modern wind turbine designs. This article gives an insight into recent developments in wind turbine flow simulations in the Wind Energy Department at Risø National Laboratory, where recent additions to our CFD code have made it possible to model the entire turbine including rotor, tower, nacelle and ground boundary. Here, an investigation carried out into the interaction between the rotor and the tower on a downwind turbine will be presented.By Frederik Zahle, Wind Energy Department, Risø, Denmark
.- Category: Articles
Reducing Structural Mass in Direct-Drive Permanent Magnet Electrical Generators
Direct-drive wind turbines offer the potential for high efficiency and reliability but they require large and heavy electrical generators. Large electrical machines require significant structural material to maintain the small airgap clearance between rotor and stator. This structural mass can be modelled, and optimised by either choosing lightweight materials or by adding to the airgap stiffness or using air-cored topologies. A new topology (the ‘E-generator') combines the structural and active material in a ‘C' core module, which can be supported lightly for high torque machines.By Alasdair McDonald, Institute for Energy Systems, UK
.- Category: Articles
New Techniques and Criteria for the Design of Structural Components
By Daniel Trias, National Renewable Energies Centre (CENER), Spain
.- Category: Articles
For many years the Dutch style of Horizontal Axis Wind Turbine (HAWT) has dominated the market, but now, for a number of reasons, developers and investors alike are taking another look at what Vertical Axis Wind Turbines (VAWT) can offer.- Is Damage Tolerance the Future?
- Introduction to 3D Landscape Tools
- The Physics Behind Wind Measurement
- Lightning Protection of Wind Turbines
- Monitoring and Condition Inspections of Wind Turbines
- The Technology of the 200-Metre Met Mast
- In Defence of the Wind
- Comprehensive Solution with Added Value
- Hull (Massachusetts, USA) Offshore Wind Project
- Wind Resource Measurement by Laser Anemometry
- Filling a Need for a New Tower Design
- Improvements in Wind Power Prediction
- What's Your Transformer Got in the Tank?
- Financing Wind in Eastern Europe
- Dispatchable Wind
- The AXTRA Turbine
- Maritime and Marine Risk Assessment of Calamitous Oil Spills
- Motorwind
- Cracks at Foundations
- Predictive Maintenance Services
- Long-Duration Wind (Aero) Generator Back-Up
- Magenn Air Rotor System (MARS)
- Energy Prediction Uncertainty
- Demand Response
- Can Wind Energy and Radio Co-exist?
- Wind Power Generation in Sri Lanka
- The European Offshore Supergrid
- Wind Energy Forecasting in Ireland
- Reliable Ultimate Loads for Wind Turbines
- A Computational Tool to Aid the Electric Power Utilities
